Electronic Universal Testing Machine with Microprocessor panel Auto ranging with digital display of Load and Elongation. Supplied with standard. Accessories for tension. Compression and Transverse tests. Export worthy colour combinations, Special sheet jaws, Hard chrome plating, Hose pipes, Branded Motors and branded electrical material will be the complete package for this UTM machine.

Salient features of microprocessor based measuring system for universal testing machines

• High-speed Data acquisition & Interface card - with sufficient speed to acquire data
• for load and elongation.
• Windows based
• Software Package.Software can run various tests and can recall data for any test done in history (If Saved).
• Software is Menu Driven for easy navigation through tests.
• Test reports and graphs directly printed on terminal printer after the test is complete through direct print commands.
• Storage and Retrieval of Data with Database support.

Data and Result Units Selectable as

1. For load : kN / Kgf
2. For Elongation/Displacement : mm

Load is indicated with a resolution of

1. Up to 20 % of the machine capacity : 0.005%
2. Above 20% of the capacity : 0.025% (Ranges are AUTOMATICALLY CHANGED)

• Elongation is indicated with the resolution of 0.01 mm when Extensometer is used.
• Displacement is indicated with the resolution of 0.1 mm when Encoder is used.
• Built-in Provision for ‘Zeroing Displacement at set pre-load.
• Built-in Provision for Tare load and Reset Displacement/Elongation.
• Auto detection and built in Safety Protection (Stop and Shutdown Loading) for Over Travel and Overload.
• Imported Pressure Sensor from a Global Brand with Built in Pre-Amplifier.
• Imported Encoder for Displacement Measurement.
• Large Storage capacity (More than 50,000 tests) Depending upon Hard Disk capacity.

Provision for Calculating :

(with extensometer)

1. UTS Value
2. % Elongation
3. Maximum Force
4. % Area Reduction
5. Break Load

• Load at Lower Yield
• Load at Upper Yield.
• % Proof Load at desired ‘% Proof points`
• Young’s Modulus.

Built-in provision for storing Test Conditions, Test data and Test Results in well defined data structure.
Built-in facility to print Test results and following graphs

• Load Vs. Elongation (If Extensometer is used)
• Load Vs. Displacement (If Encoder is used)
• Stress Vs. Strain. (If Extensometer is used)
• Proof Test. (If Extensometer is used)
• Yield (If Extensometer is used)

Commissioning of universal testing machine

• You have to prepare foundation for the machine as per the drawings supplied by the manufacturer.
• Required Hydraulic oil (Indian Oil Servo System AVLON 220) is to be procured and provided by the customer at the time of commissioning.
• Also, all electrical connections to be completed before the machine arrival and shall render assistance of semi/unskilled labor to complete the commissioning part. Unloading the machine and placing the same on the foundation has to be arranged at the customer end.

Note : PC Software will be supplied by us, But PC Shall be arranged by end user.

Technical Specification

• Maximum capacity : 600 KN (60 Tonne)
• Measuring Range : 0 600 KN
• Load measurement : BY MEANS OF PRESSURE CELL
• Load resolution : 0.03 KN upto 120 KN/0.15 KN above 120 KN
• Displacement measurement : By means of rotary encoder
• Displacement resolution : 0.1 mm
• Clearance for tensile at fully descended piston: 50 - 800 mm
• Clearance for compression at fully descended piston: 0 - 800 mm
• Clearance bet columns : 600 mm
• Ram stroke : 250 mm
• Straining piston speed at no load : 0 - 100 mm/min
• Power Requirements : 2.5 HP
• Power Supply : 440 Volts, 3 Phase, 50 H, AC Supply
• Dimensions : L 2265 x W 750 x H 2534 mm
• Weight : 3500 kg approximately

For Transverse test attachment

• Table with adjustable rollers : 160 mm
• Width of rollers : 160 mm
• Diameter of rollers : 50 mm
• Max clearance bet supports : 600 mm
• Radius of punch tops : 16, 22 mm

Technical specifications of Tensile Test Accessories

• Clamping jaws for round specimens size : 10-25, 25-40, 40-55 mm (WIDTH 70)
• Clamping jaws for flat specimens of size : 0-15, 15-30 mm (WIDTH 70)

Technical specifications of Compression Test Accessories

• Pair of compression plates : 120 mm diameter

Recommend Accessories (At Extra Cost)

1. EXTENSOMETER - ELECTRONIC -EXTENSION 2 MM
2. BEND REBEND ATTACHMENT FOR UTM
3. SHEAR TEST ATTACHMENT WITH DIES 5, 8, 12, 16, 20 MM ROUND SPECIMEN
4. SHEAR TEST ATTACHMENT WITH DIES 25, 30, 35, 40 MM ROUND SPECIMEN
5. FLEXURAL ATTACHMENT TO UTM – FOR CONCRETE BEAM